Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The group of attachments (fig. 10.3) is
made up of:
• 1 nut "A" ( external cylindrical thread
ISO 228-1)
• 1 sealing washer "D"
• 1 conical connection
cylindrical thread ISO 228-1, external
conical thread ISO 7-1)
• 1 Butane/Propane Gas connector "C".
A
D
B
Fig. 10.3
Cookers must be connected using R
materials downstream from the AGB/
BGV certificated gas stop-cock, except for
single unit cookers that are not built-in.
As a general rule, cookers are connected
downstream from the gas stop-cock, by:
• copper pipes having an appropriate wall
thickness, or;
• steel pipes, or;
• flexible R
metal pipes with AGB
HT
certification, fitted in such a way that
they will not be crushed or pulled
during use. Their bending radius must
not be less than that specified by the
manufacturer.
Exception for single unit cookers that
are not built-in.
• These cookers must be connected by
"B" (internal
• Two types of flexible elastomer hoses: until
BE
D
When installing a new cooker, or replacing
an existing one, the symmetrical model must
C
always be used.
Assembly
The gas inlet on the old cookers is equipped
with a conical thread ISO 7-1 – and the hose
is assembled as follows:
1. apply a sealing product to the thread on
HT
2. tighten up the linking component (the
3. check that the sealed joint is firmly
4. tighten up by hand the elastomer hose on
5. tighten up with a spanner;
6. open the stop cock and check that there
a flexible elastomer hose with a built–in
undetachable mechanical nozzle. Only use
those hoses that are authorised with the
label "AGB/BGV".
April 2005, there were 2 types of flexible
elastomer hoses on the market:
- the old assymetrical model, including an
end with a fixed nozzle at the side of the
cooker, and a nozzle with a loose nut
and a built-in flat sealed joint at the side
of the inside fitting (stop cock) .
- the new symmetrical model, including a
nozzle with a loose nut at both sides,
with a built-in flat sealed joint. This
symmetrical model is the only one that
will be available after the time limit.
the appliance: a strip of teflon or sealing
paste for threads (colmat) plus some
acrylic wool;
cylindrical inside thread ISO 7-1 to the
cylindrical ouside thread ISO 228-1) with
the two keys on the cooker;
inserted inside the moveable connection
on the elastomer hose (new model);
both sides;
are no leaks (soap bubbles) by smearing
on a frothing product ).
235
Publicité
Table des Matières
