BORETTI CFBG903AN Prescriptions De Montage Et Mode D'emploi page 218

WIRE RACKS
Assemble the wire racks to the oven walls using the screws (2 screws figs. 8.6a, 8.6b;
•
4 screws fig. 8.6c).
Slide in, on the guides, the shelf (figs. 8.7a, 8.7b).
•

The shelf must be fitted so that the safety notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be at the back.
Left ovens only: slide in, on the guides, the tray (figs. 8.7a, 8.7b).
•
•
To dismantle, operate in reverse order.
218
Fig.8.6a
Fig. 8.6b
Guard rail
Guard rail
Stop notch
Fig. 8.7a
Stop notch
Fig. 8.7b