Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7
ELECTRONIC PROGRAMMER (BOTTOM MAIN OVEN ONLY)
The electronic programmer is a device which groups together the following functions:
•
24 hours clock with illuminated display
•
Timer (up to 23 hours and 59 minutes)
•
Program for automatic oven cooking (bottom main oven only)
•
Program for semi-automatic oven cooking (bottom main oven only)
Description of the buttons:
Timer
Cooking time
End of cooking time
Simultaneously: Switching to
manual and program reset.
To increase the numbers on
the digital display
To decrease the numbers on
the digital display.
A
Fig. 7.1
Description of the illuminated
symbols:
flashing
A
automatic
programmed
illuminated
A
automatic position with program
inserted.
Automatic cooking taking place
Timer in operation
and A - flashing - Program error.
(The time of day lies between the
calculated cooking start and end
time).
Note:
Select a function by the respective button
and, in 5 seconds, set the required time
with the
/
operation).
After a power cut the display resets to
zero and cancels the set programs.
Caution: If the electricity supply is cut
off (the display numbers will flash), the
clock will reset and all the programs
entered will be cancelled.
-
Programmer
position
but
-
Programmer
buttons ("one-hand"
in
not
in
209
Publicité
Table des Matières
