Hofmann geodyna 7850p Mode D'emploi page 54

STEP 1
STEP 2
STEP 3
STEP 4
54
Operation
5.2.3 Lifter online help
Support pictograms on how to use the lifter are
displayed on the monitor (if any).
The symbols of the displayed help guide are described
below.
Loading sequence with free shaft
5.2.3.1
STEP 1
1a - Press the pedal to activate the lifter.
STEP 2
1a - Place the wheel onto the lifter platform.
1b - The wheel is on the lifter platform.
2a - The wheel is outside the shaft working area.
2b - Press the pedal to lift the wheel up.
STEP 3
1a - The wheel is in lifted position.
1b - Align the rim hole with the wheel holder shaft
pulling the handle upwards to let the lifter rise.
2a - Insert the wheel on the shaft.
2b - Insert the sleeve on the shaft.
2c - Keep the sleeve pressed.
3a - Lift the pedal to lock the wheel; the lifter will
lower automatically.
Unloading sequence
5.2.3.2
STEP 4
1a - Shift the platform with the wheel on it.
1b - The wheel is outside the shaft working area.
2a - Press the pedal to lower the wheel to the ground.
WARNING: UPON PRESSING THE ESC KEY THE
LIFT/HELP SCREEN WILL NO LONGER APPEAR
UNTIL THE FOLLOWING MACHINE RESTART.