Hofmann geodyna 7850p Mode D'emploi page 20

1
2
3
4 5
7a
7b
7c
7d
7e
6
20
7
4-5
Layout
4.1.2 Screen pages & Commands
The Display field shows the main Operating Screen
Pages:
Each Screen Page contains basic commands, located
at the bottom in the Commands Field. Further com-
mands may be positioned in other parts of the screen,
with specific Screen Pages and operating phases.
Fig. 4-5 INTRO SCREEN
Basic screen / Main menu.
This is the initial Screen Page, activated immediately
after starting the machine. It can be reached with the
HOME key, where present.
Commands:
1 - Balance - Selects the automatic (complete)
balancing program.
2 - Balance No Spokes - Selects the automatic
balancing program, excluding the spoke identification
process.
3 - Manual Data Entry - Selects the manual balancing
program.
4 - HELP key - Selects HELP texts for the current
function.
5 - BALANCING key - Opens the BALANCING Screen
Page.
6 - VEHICLE key - Allows selections; MOTORCYCLE
(only Manual), TRUCK, SUV, CAR (
7 - SETTINGS key - Opens the Settings Menu.
7a- PRINT key - Generates a print-out (If enabled)
7b- SETTINGS key - Opens the SETTINGS Screen
Page.
7c- CUSTOMER DATA ENTRY key - Opens the
Customer Data Entry Screen Page (
7d- USER CALIBRATION key - Starts User Calibration.
7e- COMPENSATION RUN key - Retrieves the
Compensation Run.

5.1.1).

7.6).