Basic Commands - Hofmann geodyna 7850p Mode D'emploi

1
2
3
4
5
6
7
8
9
10
11
18
4-4
4-4b
Layout
4.1.1

Basic commands

Description of keys
1 Keys (example)
– Carry out or continue certain functions or steps of
operation.
The symbols on the keys show their functions, as
specified below.
2 HOME key
– Returns you to the basic INTRO SCREEN.
3 ESC key
– Exit the current Screen
4 HELP key
– Display useful information to explain a situation and
– in case of error codes – provide hints for remedy.
5 START key
– Start the measuring run.
Press to start balancer cycle, with the wheel guard
down.
6 STOP key (forced stop)
– Immediately brakes the measuring run and
any other automatic movement in progress, for
example, wheel clamping and the Lifter (if present).
7 CONFIRMATION key
– Inserts the selected options.
8 RETURN key
– Returns you to the previous step.
9 PRINT key
– For managing print-outs, to be sent to the printer, to
the USB key or Network, based on the SETTINGS.
10 RIM DATA ENTRY key
– To manually enter wheel dimension information.
11 LIGHTING Key (if present)
– Manually switches on and off the lighting unit inside
the rim.
STOP Button
Figure 4-4b
When the Electromechanical Stop Button is pressed,
the machine stops all automatic movements.
This key also allows access to User Codes (
Page.

7.1).