Hofmann geodyna 7850p Mode D'emploi page 116

8
8
116
5-50
5-51
5-52
5-53
5-54
Operation
Figure 5-50 OPTIMISATION "2"
START is signalled on the screen.
 Perform the wheel measuring run.
A compensation run is performed.
The OPTIMISATION "3" screen appears (Fig. 5-51).
Figure 5-51 OPTIMISATION "3"
 Mount the tyre correctly on the rim (follow the
centring line) and inflate to specified inflation
pressure.
 Confirm by pressing key 8.
The OPTIMISATION "4" screen appears (Fig. 5-52).
Figure 5-52 OPTIMISATION "4"
(first measuring run with tyre)
 Clamp the wheel.
 Position the valve so that it is exactly perpendicular
to and above the chuck.
 Confirm the valve position by pressing key 8.
The OPTIMISATION "5" screen appears (Fig. 5-53).
Figure 5-53 OPTIMISATION "5"
START is signalled on the screen:
 Perform the wheel measuring run.
A measuring run is performed.
The OPTIMISATION "6" screen appears (Fig. 5-54).