Hofmann geodyna 7850p Mode D'emploi page 24

Layout
Fig. 4-7 BALANCING
Balancing Screen.
Open with the BALANCING key (5, Fig. 4-5).
Commands:
1 - HELP key - For selecting HELP texts.
2 - HOME key - Returns you to the starting page
(INTRO SCREEN).
3 - START key - Starts the measuring run.
4 - ESC key - To exit the option being executed or
displayed.
4 1 2 3 5
5 - OPT/MIN key - Starts the Optimisation / Minimisation
program.
6 - SPLIT key - Starts the procedure for splitting the
wheel weight, to be applied behind the spokes.
5 6
7 - FINE key - Increases the resolution of the values
shown, for reading remaining unbalances.
8 - STATIC key - For retrieving static balancing. Press
again to restore dynamic balancing.
7 8
9
9 - LASER POINTER key - Enables relocation of the
wheel weight in Laser Pointer mode. Press again to
confirm the position change.
10 - FREEZE WHEEL DATA key - Size data for the
10 11
wheel being processed are saved so that they can be
used with subsequent wheels of the same size (set of
wheels). This allows a shorter run.
11 - RIM DATA ENTRY key - To go to the Rim data
entry screen page.
12
12 - WAP key - The key is at the imbalance value.
13
Press to automatically index the wheel to the weights
application position; the wheel starts to reach and stop
at the WAP position of that plane.
4-7
13 - "G / OZ" key - For selecting readings in grams
or ounces.
24