Table des Matières
Publicité
geodyna 7850p
52
5-8b
Operation
5.2.2.1 Using the Automatic Lifter
Fig. 5-8b
The lifter ascends automatically as soon as the
operator operates the pedal for wheel removal.
After removing the clamping tool from the shaft:
– Support the wheel, then move the platform out
of the shaft area, towards the right.
– Press and release the control pedal; the platform
will be completely lowered.
– Roll the wheel off the balancer.
(if present):
Publicité
Table des Matières
Dépannage
