Eu Declaration Of Conformity (Extract) - Tractel corso LT-1B Manuel D'installation Et De Manutention Original

Operation and Installation Manual
15

EU Declaration of Conformity (Extract)

The manufacturer hereby declares
TRACTEL Greifzug GmbH
Scheidtbachstraße 19–21 51469 Bergisch Gladbach
represented by
Dipl.-Ing. Philippe Gastineau
General Manager
DECLARATION OF CONFORMITY
that the machine described complies with technological safety standards that were applicable to the equipment in the
EUROPEAN UNION when it was launched on the market by the manufacturer.
APPLICABLE DIRECTIVES AND STANDARDS:
2006/42/EC;
EN1808; EN ISO 12100
DESIGNATION
Mounting clamp
APPLICATION
Transport of persons
MODEL
LT-1B, LT-2B, LT-3B, LT-5B, LT-10B
SERIAL NUMBER
Year of manufacture
from 11.2020
Commissioning the machine is prohibited until the machine in which this is installed complies as a whole with the regulations
of the 2006/42/EC Directive, the corresponding national legislation for implementing the regulations in accordance with
national law and the corresponding declaration of conformity has been issued.
The valid EN 1808 standard must be applied for the PAM in which the machine is installed.
Responsible for the documentation:
Dipl.-Ing. Philippe Gastineau, Tel.: +49 (0) 2202 1004 0
Bergisch Gladbach, date
EN-12 G940.8 - 01/2021