Declaration Of Conformity; Transport And Storage; Protection; 11. Regulations And Standards - Tractel dynasafe Mecha 3.2 Manuel D'installation, Utilisation Et Maintenance

-
Use the load limiter without first
becoming familiar with the user
manual.
-
Use the load limiter outside the
validity periods
periodic inspection plan to which the
device is subject.
-
Use the load limiter if its connection
or condition are in visibly poor
condition.
-
Shunt the electrical circuit controlled
by the device.
8.

Declaration of conformity

Copy of declaration conformity in appendix.
9.

Transport and storage

During storage and/or transport, the product
must be:
-
Packed in its original packaging
-
Stored in a dry location
-
Stored at a temperature between
-30°C and 80°C
-
Protected
mechanical or any other type of
attack.

11. Regulations and standards

The product described in this manual complies
with the following:
European standards
Machinery Directive 2006/42/EC & ISO13849-
1
defined by the
from chemical,
10. Product
environmental protection
The product must
accordance with the regulations applicable in
the country of use.
The different product components must be
recycled on the basis of the table below, after
separating metal and synthetic materials.
These materials must be recycled by specialist
organisations.
At the time of disposal, only trained individuals
may dismantle the product to separate its
components.
Component
Product body
Micro-switches
Tractel® can recycle the product. Please
contact Tractel® for more information.
disposal and
be disposed of in
To be treated as a
waste of the type
Aluminium & Steel
Electronics
13
GB
GB
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
PL
RU