Jet angle 15°, maximum effect at a
distance of approx. 7 cm.
Applications:
Cleaning vehicles and machines
–
Cleaning floors and surfaces
–
Cleaning roofs and facades
–
Using the rotary nozzle
Nozzle with rotating jet. To remove
stubborn dirt on hard-wearing surfaces.
Maximum effect at a distance of 10 cm.
Working without nozzle
The spray attachment can also be used
without nozzles at low pressure, e. g.,
for rinsing with a large flow of water.
Cleaning very dirty surfaces
Soak extremely dirty surfaces with water
before cleaning them.
Detergents
Detergents improve the cleaning effect.
The corresponding exposure time
(dependent on the detergent used)
increases the cleaning performance.
Always use detergent in the specified
dosage and follow the corresponding
instructions for use of the detergent.
RE 88
Apply the detergent starting at the
bottom and working up and do not allow
to dry.
Maximum effect at a distance of 1 m.
Mechanical cleaning
The additional use of e. g. rotary nozzles
or washing brushes helps to remove
highly adhesive layers of dirt.
Switching Off
Move the master switch to 0 and
N
turn off the water supply
Actuate the spray gun until water
N
only drips from the spray head (the
machine is now depressurized)
Release trigger
N
Press the safety latch – the lever is
N
locked to prevent inadvertent
operation
English
43