Switching Off; Storing The Machine; Transporting The Unit - Stihl RB 302 Mode D'emploi

Switching Off

N
Switch off engine as described in
the engine instruction manual
supplied
N
Turn off water supply
N
Actuate the spray gun until water
merely drips from the spray head –
the machine is now depressurized
N
Release trigger
1
N
Press the safety latch (1) in the
direction of the arrow – the spray
gun is locked to prevent inadvertent
operation
N
Disconnect water intake hose from
machine and water supply
After use
N
Roll the high-pressure hose up on
the brackets provided for this
purpose – see "Main parts of the
machine"
RB 302, RB 402 PLUS
All manuals and user guides at all-guides.com

Storing the Machine

Store the machine in a dry room where it
is protected from frost.
If protection from frost cannot be
guaranteed, draw glycol-based
antifreeze – like that used in motor
vehicles – into the pump:
N
Disconnect water intake hose
N
Remove spray lance – see "Fitting,
removing spray lance"
N
Switch on the machine, switch it off
again after a maximum of 1 minute
N
Connect suction hose (special
accessory) to the water intake of the
machine and immerse it in the
container with antifreeze
N
Insert spray gun without spray lance
in the same container
N
Starting the engine
N
Actuate the spray gun until a
uniform jet emerges
N
Remove suction hose from the
container with antifreeze
N
Actuate the spray gun to pump out
the rest of the antifreeze
N
Switch off the engine
N
Keep leftover antifreeze in a sealed
container

Transporting the Unit

Removing the pushbar
The pushbar can be removed to simplify
transport in vehicles:
2
1
N
Undo both star handles (1)
N
Lift off the pushbar (2)
English
1
11