SATA jet 100 B Mode D'emploi page 82

Operating instructions SATAjet 100 B F (RP/HVLP), B P
9. Guarantee conditions
During the period of twelve (12) months from the date of original purchase, SATA will repair or
replace the product without charge for parts or labour subject to the following conditions.
The warranty covers the value for production parts or defects in material during the warranty period.
The warranty does not include damages caused by improper handling, normal wear and tear, mecha-
nical damages, faulty assembly, improper maintenance, unusual spray materials substitute materials,
chemicals such as alkaline solutions and acids, electro-chemical or electric influences, as far as this
damage is not the result of any error committed by us.
Abrasive spray material such as red lead and liquid grinding material etc. reduce the lifetime of valves,
packings, guns and nozzles. Wear and tear damage caused by this are not covered in this warranty.
Units should be inspected upon delivery by the consumer. Obvious damage must be reported within 14
days of receipt of the unit to the supplier to avoid loss of the right to claim notice of defects. Additional
claims such as compensation are excluded. This refers as well to damages caused during meetings ,
training sessions, or demonstrations.
Should the consumer require immediate repair or replacement before a determination of whether the
affected unit is covered by the warranty, the repair or the replacement will be made and charged at
the current prices. If it is determind that the item is covered by the warranty, a credit will be issued for
the repair or replacement. Replaced parts become the property of SATA or their distributor. Notice of
defects or other claims do not entitle the consumer to delay or refuse payment. Returned merchandise
to SATA must be sent prepaid. All service charges, freight and handling charges are to be paid by the
consumer. The charges made will be in accordance with the currently existing pricing. Suretyships
may not prolong the warranty period. This warranty terminates upon unauthorized inference.
Caution! When using solvents and cleaning agents based on halogenated hydrocarbons e.g.
1.1.1-trichlorethylene and methylene chloride, chemical reactions can occur on the aluminium
cup, gun and galvanized components (small quantities of water added to 1.1.1-trichlorethyelene
produce hydrochloric acid). This can cause oxidation of the components; in extreme cases, the
reaction can be explosive. Therefore, only use solvents and cleaning agents for your paint gun
which do not contain the substances named above. You must never use acid, alkaline solutions
/ lye or stripping agents for cleaning.
10. EC Declaration of Conformity
Paint spray guns made by SATA have been developed, designed and manufactured in accordance
with EC directive 98/37/EC, 94/9/EC.
The following harmonized Standards have been applied during this process: DIN EN 12100,
Sicherheit von Maschinen, Geräten und Anlagen (Safety of Machines, Appliances and Systems),
DIN EN 1953, DIN 31000, DIN 31001 Teil (Part) 1, BGR 500 (BGV D25), BGV D24 and, if required,
ZH 1/406, ZH 1/375 and ZH 1/181.
The technical documentation is provided in full and the operating instructions for the spray gun are
supplied in the original version and in the national language of the user.
VIII.10
SATA GmbH & Co. KG
President