Sony Handycam DCR-PC330E Mode D'emploi page 80

NTSC PB
DATA CODE
REMAINING
REMOTE CTRL
REC LED
80
Using the Menu
When you play back an NTSC color system video, select the available system of
your TV to play back the video with.
GON PAL TV
Select to play the video back on a PAL system TV.
NTSC 4.43 Select to play the video back on a TV with an NTSC 4.43 mode.
Tip
z
• When you play a tape back on a Multi System TV, select the best mode while you are
viewing the picture on the TV.
GOFF
Select not to display date, time and the camera settings data during
playback.
DATE/TIME
Select to display the date and time during playback (p. 51).
CAMERA DATA
Select to display the camera settings data during playback (p. 51).
GAUTO
Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch
ON
Select to always display the remaining tape indicator.
GON Select when using the Remote Commander supplied with your
camcorder.
OFF
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
Note
b
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
GON
Select to turn on the camera recording lamp on the front of your
camcorder during recording.
(play/pause).