Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

[OVERLAP] (fade in only)
[WIPE] (fade in only)
[DOT FADER] (fade in only)
1
Slide the POWER switch to select the
CAMERA-TAPE mode.
2
Touch
in the standby mode (to
fade in) or during recording (to fade
out).
3
Touch [FADER].
If the item is not displayed on the screen,
touch
/
. If you cannot find it, touch
[MENU], and select it from the
APPLI.) menu.
4
Touch the desired effect, then touch
.
When you touch [OVERLAP], [WIPE] and
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
5
Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
In step 3, touch [OFF].
b Note
• You cannot use the FADER function together with:
– Super NightShot function
– Color Slow Shutter function

– Digital effect

– [SMTH INT. REC] (Smooth interval tape
recording)
– [FRAME REC] (Frame recording)
Fading in from still image on the
"Memory Stick" – Memory overlap
You can fade in from the still image on the
"Memory Stick" to the movie currently being
recorded on the tape.
(PICT.
Still image
1
Check that you have a "Memory Stick"
with the still image to be superimposed
and a tape in your camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
3
Touch
4
Touch
5
Select
[
OVERLAP] by touching
and
The recorded image appears on the
thumbnail screen.
.
[
MENU].
(PICT. APPLI.), then
.
Recording
Movie
/
,continued
39

Publicité

Chapitres

Table des Matières
loading

Table des Matières