Sony Handycam DCR-PC330E Mode D'emploi page 78

AUDIO MIX
LCD/VF SET
LCD BRIGHT
LCD BL LEVEL
LCD COLOR
VF B.LIGHT
78
Using the Menu
Notes
b
• You can playback a dual sound track cassette on this camcorder. However, you cannot
record a dual sound track on this camcorder.
• The setting returns to [STEREO] when you disconnect the power source from your
camcorder for more than 5 minutes.
You can adjust the audio balance between the originally recorded sound (ST1)
and sound added afterwards (ST2) on the tape (p. 99).
Notes
b
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
The recorded picture will not be affected by this setting.
See page 17 for details.
You can adjust the brightness of the LCD screen's backlight.
GNORMAL
Standard brightness.
BRIGHT Select to brighten the LCD screen.
Notes
b
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
Touch / to adjust the color on the LCD screen.
Low intensity
You can adjust the brightness of the viewfinder.
GNORMAL
Standard brightness.
BRIGHT To brighten the viewfinder screen.
High intensity