Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Notes
b
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
A/V c DV OUT
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
GOFF
ON (

VIDEO INPUT

When you connect your camcorder to another device using the supplied A/V
connecting cable, set the type of plug you are going to use for the connection.
GVIDEO
S VIDEO
USB-CAMERA
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming).
For details, refer to the "Computer Applications Guide."
GOFF
USB STREAM
USB-PLY/EDT
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or "Memory Stick" in your camcorder on your computer. For details,
refer to the "Computer Applications Guide."
GSTD-USB
USB STREAM
Select when not using the Digital convert function.
)
To output analog images and sound in digital format using your
camcorder.
The analog signal input to the A/V jack of your camcorder will be
converted and output from the DV Interface of your camcorder.
For details, refer to the "Computer Applications Guide."
Select to input a video signal.
Select to input an S video signal.
Select to deactivate the USB Streaming function.
Select to activate the USB Streaming function.
Select to view the picture on the "Memory Stick."
Select to view the picture on the tape.
,continued
79
Using the Menu

Publicité

Chapitres

Table des Matières
loading

Table des Matières