Assembling, Attaching And Detaching The Grass; Catcher Box; Adjusting The Lawn Mower For The User; Adjusting The Handlebar - Stihl RMA 443 VC Notice D'emploi

English
► Press cable (7) into holders (8).
► Fasten cable (7) to the handlebar using cable clip (9).
The handlebar must not be dismantled again.
7.2

Assembling, Attaching and Detaching the Grass

Catcher Box

7.2.1 Assembling the Grass Catcher Box
► Fit upper part of grass catcher box (1) onto lower part of
grass catcher box (2).
► Press pins (3) through openings (4) from the inside.
► Press upper part of grass catcher box (1) downwards.
The upper part of the grass catcher box engages with a
click.
50

8 Adjusting the Lawn Mower for the User

7.2.2 Attaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (2) by handle (3) and
attach to mounts (5) using hooks (4).
► Set down discharge flap (1) on grass catcher box (2).
7.2.3 Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the handle.
► Close the discharge flap.
8 Adjusting the Lawn Mower for the User
8.1

Adjusting the Handlebar

► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Place the lawn mower on a level surface.
0478-131-9948-A