Folding The Handlebar; Removing And Fitting The Battery; Fitting The Battery; Removing The Battery - Stihl RMA 443 VC Notice D'emploi

9 Removing and Fitting the Battery

► Hold handlebar (1).
► Press lever (2) downwards and hold.
► Move handlebar (1) into the desired position.
► Release lever(2) and ensure that the handlebar fully
engages again.
8.2

Folding the Handlebar

The handlebar can be folded for space-saving transport or
storage.
► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Place the lawn mower on a level surface.
► Press and hold the lever.
► Fold down the handlebar forwards.
9 Removing and Fitting the Battery
9.1

Fitting the Battery

RMA 443 PV and RMA 448 PV:
The RMA 443 PV and RMA 448 PV lawn mowers can be
operated with two batteries. As soon as the battery in the
first battery compartment (3) is discharged, the machine
automatically switches to the battery in the second battery
compartment (4). There must always be a battery in the first
battery compartment (3) when working.
0478-131-9948-A
RMA 443 VC and RMA 448 VC:
The RMA 443 VC and RMA 448 VC lawn mowers are
equipped with a battery compartment (3) and a transport
compartment (4). The lawn mowers can only be operated
with the battery in battery compartment (3). A replacement
battery can be carried in transport compartment (4).
► Open flap (1) as far as the stop and hold.
► Push battery (2) into battery compartment (3) as far as it
will go.
Battery (2) engages with a click and is locked in place.
► If a second battery is to be carried: fit the battery in battery
compartment (3) or transport compartment (4).
The battery engages with a click and is locked in place.
► Close flap (1).
9.2

Removing the Battery

► Place the lawn mower on a level surface.
English
51