Checking The Blade; Testing The Battery - Stihl RMA 443 VC Notice D'emploi

Masquer les pouces Voir aussi pour RMA 443 VC:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
English
► If the lever moves too freely: Do not use your mower and
contact your STIHL servicing dealer for assistance.
The lever is defective.
Switching on the mower
► Insert the activation key.
► Fit the battery.
► Depress the lockout button with your right hand and hold
it there.
► Pull the switch lever for blade drive fully in direction of the
handle with your left hand and hold it so that your thumb
is wrapped around the handle.
The blade rotates.
► If 3 LEDs flash red: Remove the activation key and
battery, and contact your STIHL servicing dealer for
assistance.
There is a malfunction in the mower.
► Release lockout button and switch lever for blade drive.
The blade stops rotating after a brief delay.
► If the blade continues to rotate: Remove the activation key
and battery, and contact your STIHL servicing dealer for
assistance.
There is a malfunction in the mower.
Switching on wheel drive
► Insert the activation key.
► Fit the battery.
► Pull the switch lever for wheel drive fully in direction of the
handle and hold it so that your thumb is wrapped around
the handle.
The mower begins to move forwards.
► Release the switch lever for wheel drive.
The mower comes to a standstill.
► If the mower does not stop: Remove the battery and
contact your STIHL dealer for assistance.
There is a malfunction in the mower.

12.2 Checking the Blade

► Switch the lawn mower off, pull out the activation key and
remove the battery.
54
12 Checking the Lawn Mower and Battery
► Upend the lawn mower, @ 17.1.
► Measure the following:
– Thickness a
– Width b
– Sharpening angle c
► If the minimum thickness or minimum width are fallen
below: replace the blade, @ 21.2.
► If the sharpening angle is not observed: sharpen the
blade, @ 21.2.
► If anything is unclear: consult a STIHL specialist dealer.

12.3 Testing the Battery

► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
0478-131-9948-A

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rma 443 pvRma 448 vcRma 448 pv

Table des Matières