Assembling, Attaching And Detaching The Grass; Assembling The Grass Catcher Box; Adjusting The Lawn Scarifier For The User; Folding Up And Adjusting The Handlebar - Stihl RLA 240 Notice D'emploi

Masquer les pouces Voir aussi pour RLA 240:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

English
► Remove the cable ties.
► Remove the combing roller from the transport
compartment and keep it in a safe place.
7.3

Assembling, Attaching and Detaching the Grass

Catcher Box
7.3.1

Assembling the Grass Catcher Box

► Pull fabric (1) over frame (2) so that the base plate is on
the bottom and handle (3) is on the outside of the fabric.
► Press plastic profiles (4) onto the frame.
The plastic profiles engage with a click.
7.3.2
Attaching the Grass Catcher Box
► Switch the lawn scarifier off.
110

8 Adjusting the Lawn Scarifier for the User

► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (3) by handle (2) and
suspend shaft (5) in mount (4).
► Set down discharge flap (1) on grass catcher box (3).
7.3.3
Detaching the Grass Catcher Box
► Switch the lawn scarifier off.
► Place the lawn scarifier on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the handle.
► Close the discharge flap.
8 Adjusting the Lawn Scarifier for the
User
8.1

Folding Up and Adjusting the Handlebar

► Switch the lawn scarifier off, pull out the activation key and
remove the battery.
► Place the lawn scarifier on a level surface.
0478-670-9909-A

Publicité

Table des Matières
loading

Table des Matières