Running A Cycle; Preparation - Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation

Running a cycle



Preparation

Sequence
of
operations
1 -
-
-
2 -
-
3 -
4 -
5 -
-
-
6 -
7 -
8 -
9 -
10 -
Operation
Connect the water supply hose,
Connect the drain hose,
Open the water tap
Connect the power cable,
Enable the system's circuit breaker,
Switch the device on by pressing the master switch
Open the lid and replace the cotton wool in the
housing
Place the drain cap "D" in the drain opening in
vessel "A",
Slide the stirrer "C" into the drain cap "D"
Slide the decanting tubing "B" into the stirrer "C"
Pour in 1/3 of the total deionised water to be
prepared into the vessel
Start up the stirrer at a minimum of speed 5
Slowly pour the powder into the vortex
Pour the remainder of the deionised water, down
the edge of the wall and on the stirrer in order to
remove the powder from the surfaces, to reach the
total volume to be prepared (a maximum of 30
litres)
Close the lid and the drain access hatch
96
Symbol