Stirrer In Stand-By Mode; Controlling The Stirrer In Stand-By Mode - Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation

Stirring parameters
The stirrer's speed can be set between 20 rpm and 110 rpm by selecting a figure between 1 and 9 in the
stirring speed parameters.
The following table displays the corresponding values in rpm:
Speed parameter
Corresponding speed in
rpm
The speed setting can be set in stand-by mode and must be configured in each program for all stages of the
cycle (see § stirrer in stand-by mode and § program creation)

Stirrer in stand-by mode

Controlling the stirrer in stand-by mode

CYCLE
PROGRAM
STIRRER
PARAMETERS
31.7°
24/03/2016
16:46:35
Active keys:
Switches back to the first screen in the program choice sequence without stopping
PROGRAM
the stirrer
Switches to the "Parameters" screen
PARAMETERS
Increase / decrease the stirrer's speed (0 = STOP; 9 = max.) - Immediate
Arrows
application
Switches back to the first screen in the program choice sequence without stopping
Enter
the stirrer
Switches back to the first screen in the program choice sequence and stops the
Escape
stirrer
1 2 3
20 rpm 30 rpm 40 rpm
STIR SPEED
4 5 6
50 rpm 60 rpm 70 rpm
:
83
7 8 9
80 rpm 90 rpm 110 rpm
5