Description Of Screens - Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation

Light colour
Permanently on
White
Flashing
Permanently on
Blue
Flashing
Permanently on
Orange
Flashing
Permanently on
Red
Flashing
Permanently on
Green
Flashing


Description of screens

The navigation tree appears below:
"STANDBY" screen
"Standby" and "CYCLE - PROGRAM" screen
This screen appears when the device is started in stand-by mode. The last program used is suggested when
the device is switched on. Its no., name and a summary of the program's parameters are displayed.
The temperature of the vessel probe is displayed in real time in the left-hand column.
Status
Stand-by
Processing to Media preparation
Warning message during cycle (Safety cover or doortrap not
closed)
Warning message during cycle (step message, temperature out
of reference tolerance
Major default during cycle (heating default, cooling default)
Media ready for dispensing
Waiting for the acknowledgement of the safety message
"Make sure that vessel pressure is 0 bar before opening"
CYCLE
PARAMETERS
74
Description of the status
PROGRAM
STIRRER
WATER
PROGRAMS
USERS
SETTINGS
MAINTENANCE