Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation page 87

Heating
Temperature
Each program contains the following information:
Program number
Program name
Number of steps n
Name of step no. 1
Temperature setpoint for step no. 1
Duration of step no. 1
Alarm at the beginning of step no. 1
Alarm message for step no. 1
Stirring speed in transition to step no. 1
Stirring speed during step no. 1
Name of step no. 2
Temperature setpoint for step no. 2
Duration of step no. 2
Alarm at the beginning of step no. 2
Alarm message for step no. 2
Stirring speed in transition to step no. 2
Stirring speed during step no. 2
The choice of program number is determined by the operation prior to starting the "program creation /
modification" sequence.
When creating a program, the fields are empty, so valid values must be entered in all the fields.
When modifying a program, the fields are already populated with the program's current parameters. The
user chooses which fields to modify.
Step 1
Cooling
Field title
Heating
Step 3
Step 2
87
Cooling
Step 4
Number
01 to 50
40 characters
2, 3 or 4
40 characters
25.0 to 125.0°C
1 to 999
yes/no
40 characters (if an alarm is
enabled)
1 to 9
1 to 9
40 characters
25.0 to 125.0°C
1 to 999 or infinite if n=2
yes/no
40 characters (if an alarm is
enabled)
1 to 9
1 to 9
Time