Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Distriwel –August 2017
Running a cycle
Preparation
Before any cycle start, it is vital to correctly install the dispensing hose. Please follow the procedure
below, taking care not to crush the hose.
Hose installation is an
essential part of the process,
and guarantees proper
operation of the equipment
2. Push the cam closing lever to
the right
1. Place the hose between the
pump rollers and the V-shaped
positioning system
3. Press down on the
black latches on either
side of the pump.
WARNING take care not to
crush the silicone hose
Publicité
Table des Matières
Dépannage
