Troubleshooting; Messages, And Alarms; Light Alert - Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation



Troubleshooting

Lights, Messages, and alarms


Light alert :

There is a light on each side of the control panel. Its role is to indicate, alert or inform the user of
an alarm, message or a status change of the cycle. It indicates this by means of a light that is on or
off, flashing or permanently on, and is white, orange, red, blue or green, based on the rules
appearing in the following table:
Light colour
White
Blue
Orange
Red
Green
Alarm,warning :
In case of light alert, a message is displayed in the "Warning message area" to inform the user of an action
to do, a safety to be closed, a temperature out of range, a problem during the cycle,...
Status
Permanently on Stand-by
Flashing
Permanently on Processing to Media preparation
Flashing
Permanently on Warning message during cycle (Safety cover or doortrap not
closed)
Flashing Warning message during cycle (step message, temperature out
of reference
Permanently on
Flashing Major default during cycle (heating default, cooling default)
Permanently on
Media ready for dispensing
Flashing
"Make sure that vessel pressure is 0 bar before opening"
Description of the status
Waiting for the acknowledgement of the safety message
109