Risks And Prevention; The Environment; Discharging Waste Water; Scrapping The Machine - Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation



Risks and prevention

Symbol Risk
Burns
Burns
Pinching


The environment

Discharging waste water


Water drained from the cooling system can be discharged into the rainwater system.
The system must be designed to accommodate the discharge of boiling water.
Water used to clean the vessel must be discharged into the waste water system

Scrapping the machine


This device contains metal, plastic, electrical and electronic components.
Directive 2002/96/EC on the recovery and recycling of Waste Electrical and Electronic
Equipment (WEEE) requires Electrical and Electronic Equipment (EEE) to be recycled at
the end of its life.
For this reason, end users must dispose of electrical and electronic waste at dedicated
waste centres or collection points.
Cause Component
Lid
Hot surface Bowl
Hot steam Safety valve
Dispensing and
Splashing
adding port caps
Safety valve
Water steam
Caps
Lid
Lid weight
64
Means of
prevention
Thermal insulation
of components
Do not touch hot
surfaces
Lid and hatch
locked during
Wear gloves
the working cycle
No access above
Wear gloves
80°C
Release the
steam before
Safety valve opening the lid by
using the safety
valve
No access above
Wear gloves
80°C
Counter balance Hold the lid
springs during closing
.
Instruction