Using Connected Equipment And Traceability - Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation



Using connected equipment and traceability

The use of peripherals is only possible with devices equipped with the eTrace
communication module (optional).
This module allows data collection of the cycles on a USB stick. This one has to be
connected to the eTrace before starting the cycle. The data can be recovered 30
seconds after the cycle end in a CSV file (gross data) and a PDF file.
The PDF document is a summary of the cycle that makes a quick decision possible
for its validation.
The CSV data allows data processing and provides further information on events
and status of the cycle.
The eTrace module can also be connected to Ethernet network via RJ45 cable or by Wify by using an adapted
key. The data are then available on line during a cycle on a Web page. Data queries can be launched for
specific needs and XLS files generated, if needed.
105