Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation page 81

The automated preparator enables a "preparation cycle" to be performed for a volume of culture
medium.
A preparation cycle comprises n "steps"; n = 2, 3 or 4
Each step is defined by a temperature setpoint (in °C) and a duration (in minutes)
The temperature setpoint for a step is equal to or greater than 25.0°C and equal to or lower than
125.0°C. It is defined to the nearest 0.1°C.
The duration of a step is equal to or greater than 1 minute and equal to or less than 999 minutes. It
is defined to the nearest 1 minute.
The duration of the last step is always infinite (the preparation cycle is stopped by the user).
The start of the preparation cycle is triggered either by the user (manual start), or by means of a
timer (scheduled start).
The phases between the steps are transition phases, which may be "heating" or "cooling".
Step 1
Heating
Temperature
Heating
Step 3
Cooling
Step 2
Cooling
Step 4
Time
81