Lights - Alliance Bio Expertise MEDIAWEL 30 Manuel D'utilisation

Interrupting a cycle
The cycle can be interrupted at any stage. Simply pressing the key stops
Interrupting a cycle immediately results in cold water flowing through the double jacket, if the temperature
of the medium was less than 80°C.
In all cases, the vessel should only be accessed after having enabled the vessel's safety valve (pull
the ring upwards) and when wearing protective gloves designed for high temperatures. In effect,
surfaces may still be at very high temperatures and can cause burns.

Lights


There is a light on each side of the control panel. Its role is to indicate, alert or inform the user of the status
of the current cycle, of an alarm or a status. It indicates this by means of a light that is on or off, flashing or
permanently on, and is white, orange, red, blue or green, based on the rules appearing in the following
table:
Light colour
White
Blue
Orange
Red
Green
Status
Permanently on
Flashing
Permanently on
Flashing
Permanently on
Flashing
Permanently on
Flashing
Permanently on
Flashing
Description of the status
Stand-by
Processing to Media preparation
Warning message during cycle (Safety cover or doortrap not
closed)
Warning message during cycle (step message, temperature out
of reference
Major default during cycle (heating default, cooling default)
Media ready for dispensing
Waiting for the acknowledgement of the safety message
"Make sure that vessel pressure is 0 bar before opening"
101
the cycle.