Description Of Screens; Cycle Menu; Dish Dispensing; Parameters Menu - Alliance Bio Expertise DistriWEL Manuel D'utilisation

Distriwel – Août 2017

Description of screens


The user can choose between 2 different modes:
Cycle

Dish dispensing

Pump

Cycle menu


Dish dispensing
This menu let the user view and execute one of your previously recorded programs (01 to 60) and select:
- operator,
- batch No.,
- total dispensing volume
- number of dishes to be dispensed
The user will also unload and load the Petri dishes, as necessary.
Lastly, you can prime and calibrate the pump.
Using the pump
This menu lets the user operate the pump for their own applications in automatic or manual mode and create programs
(as in 1).

Parameters menu


This menu lets you set the following parameters:
- Create dispensing programs
- Create pump programs
- Create new operators
Settings
- (Date, time, language)
Maintenance
- with access to service 1 (motion of the carousel, disk, piston) and service 2 (dish calibration)
DISTRIWEL
Parameters
settings
Creation of a dispensing program
Creation of a pump program
Creation of a user
Settings
Maintenance