After Finishing Work; Transporting; Storing - Stihl MH 600 Notice D'emploi

English
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.

12 After Finishing Work

12.1 After Finishing Work
► Stop the engine.
► Allow the tiller to cool down.
► If the tiller is wet: allow the tiller to dry.
► Clean the tiller.
► Clean the hoes.

13 Transporting

13.1 Transporting the Tiller
► Stop the engine.
► Detach retaining pin (1) and remove pin (2).
40
► Fold front wheel (3) downwards so bores (4)
align.
► Insert pin (2) through bores (4).
► Push retaining pin (1) through the bore in
pin (2).
Pin (2) is secured and front wheel (3) is in the
transport position.
► If the tiller is being transported using the front
wheel:
► Place the front wheel in the transport posi‐
tion.
► Hold the tiller by both handles and lift so it is
resting on the front wheel.
► Push or pull the tiller slowly.
► If the tiller is being carried:
► One person holds the front transport handle
using both hands and another person holds
the handles using both hands.
► The tiller must be lifted and carried by two
people.
► Wear work gloves made from resistant
material.
► If the tiller is being transported in a vehicle:
► Secure the tiller so it does not tip over and
cannot move.

14 Storing

14.1 Storing the Tiller
► Stop the engine.
► Allow the tiller to cool down.
► Place the front wheel in the transport position.
► Fasten blade spur at fifth bore.
12 After Finishing Work
0478-404-9607-B