Positioning; Important - SPM K-Soft Manuel D'utilisation

Date of issue: October, 2018
Fig. 1
Fig. 2

6. POSITIONING

FOR MAINTENANCE STAFF ONLY
Installation and subsequent maintenance
operations must be carried out by staff
qualified and trained in the use of the
appliance in accordance with the
regulations in force.
a) After removing the packaging, preserve all
parts of it for winter storage and ensure the
integrity of the appliance (fig. 1).

!IMPORTANT!

The packaging must be kept out of the
reach of children as it represents a
potential safety/health hazard.
b) Place the appliance on a solid and flat surface
leaving 8 inches on all the sides so that the
body of the appliance is well ventilated. Install
the appliance in a dry area and avoid installing
it near heat sources. The ambient operating
temperature should be between 75 and
90°F.
c) Check that the mains voltage corresponds to
that indicated on the data plate and the power
available is appropriate for the requirements of
the appliance.
Insert the plug into an earthed socket, avoiding
multiple sockets.
FOR FURTHER PRECAUTIONS, READ THE
"CONNECTING TO MAINS POWER SUPPLY"
SECTION CAREFULLY.
d) The installation must be performed according
to the manufacturer's instructions. Failure to
comply with these instructions may impair
operation of the appliance.
Important
Earthing is necessary and required by law.
Before carrying out any cleaning or
extraordinary maintenance be sure to
disconnect the appliance from the mains by
removing the power plug.
In case of breakdown or malfunction switch off
the appliance and unplug it.
Revision 1 Page 28/72