SPM K-Soft Manuel D'utilisation page 45

Problem
The LED for the ON
button and the one for
the level are ON and the
buzzer alarm is playing
The LED for the ON
button is blinking and
the buzzer alarm
playing
The LED for the ON
button and the one for
the level are blinking
and the buzzer alarm is
playing
Date of issue: October, 2018
Possible cause
Product level low in the upper tank
•
Tank probe detached
•
Temperature inside the tank is too
•
is high
•
Product temperature too low
Temperature probe short circuit
•
Refill product in the upper tank
•
Reconnect probe
•
Turn off the appliance and wait a few
•
minutes for
system,
washing with hot water, to decrease
The amount of mix in the freezing
•
cylinder is too small, top up the top tank
or open mix flow tube
Replace probe
•
Revision 1
Solution
the temperature of
which has been raised
Page 45/72
the
by