SPM K-Soft Manuel D'utilisation page 38

- Remove the side drawer as indicated in figure
27 and check for some dripping remembering to
reinsert it once checked.
Attention
The machine is provided with a left side
drawer to collect some dripping from the
cylinder backside; it is suggested to check
the drawer every time the cleaning
operations are performed.
In case some drips are found, it is
necessary to check the backside gaskets
correct assembly and eventually replace
them with new ones.
- Repeat the same operations with a sponge
soaked in clean water and dry all surfaces
thoroughly with a clean cloth.
Once you have performed all these cleaning and
sanitising operations thoroughly, you can
reassemble the components.
The correct assembly of the appliance is very
important to prevent mix leakage and damage
to the appliance.
To assemble the appliance you must have an
approved lubricant (Vaseline) available.
Always make sure that all parts have been
properly washed and sanitised and that the
person carrying out the reassembly has
thoroughly washed and disinfected hands and
forearms.
Date of issue: October, 2018 Revision 1
Fig. 27
Page 38/72