Checking The Oil Level; Oil Change - Stihl RB 302 Notice D'emploi

English

Checking the oil level

High-pressure pump
The oil level in the high-pressure pump
and the gearbox (RB 402 PLUS only)
must be checked at monthly intervals.
Place the machine on a flat
N
horizontal surface
Check that the oil is level with the
N
center of the oil sight glass
If necessary, add oil (SAE 15 W 40)
N
Engine
Check the engine oil level as described
in the engine instruction manual
supplied.
NOTICE
The engine stops automatically if the oil
level is too low. The engine cannot be
started without the correct oil level.
16

Oil change

Let the machine warm up – this will
N
simplify the oil change
Waste oil must be disposed of in
accordance with the statutory
regulations.
High-pressure pump
Remove shroud
N
RB 302
1
2
First oil change after 50 hours of
operation, then every six months or
every 200 hours of operation.
Unscrew oil filler cap (1)
N
Place a suitable container (1 liter)
N
under the pump
Unscrew the oil sight glass (2) and
N
tilt the machine to drain it
Drain oil into container
N
Screw in and tighten the oil sight
N
glass (2)
Add oil (180 ml, SAE 15 W 40)
N
Check the oil level
N
Refit and tighten oil filler cap
N
Refit the shroud
N
RB 402 PLUS
1
3
First oil change after 50 hours of
operation, then every six months or
every 500 hours of operation.
Unscrew oil filler cap (1)
N
Place a suitable container (1 liter)
N
under the pump
Unscrew the oil drain plug (3)
N
Drain oil into container
N
Refit and tighten oil drain plug
N
Add oil (560 ml, SAE 15 W 40)
N
Check the oil level
N
Refit and tighten oil filler cap
N
Refit the shroud
N
Engine
The engine oil must be changed as
described in the engine instruction
manual supplied.
RB 302, RB 402 PLUS