Checking The Oil Level; Oil Change - Stihl RB 302 Mode D'emploi

Checking the oil level

High-pressure pump
The oil level in the high-pressure pump
and the gearbox (RB 402 PLUS only)
must be checked at monthly intervals.
N
Place the machine on a flat
horizontal surface
N
Check that the oil is level with the
center of the oil sight glass
N
If necessary, add oil (SAE 15 W 40)
Engine
Check the engine oil level as described
in the engine instruction manual
supplied.
The engine stops automatically if
the oil level is too low. The engine
cannot be started without the
correct oil level.
RB 302, RB 402 PLUS
All manuals and user guides at all-guides.com

Oil change

N
Let the machine warm up – this will
simplify the oil change
Waste oil must be disposed of in
accordance with the statutory
regulations.
High-pressure pump
N
Remove shroud
RB 302
1
2
First oil change after 50 hours of
operation, then every six months or
every 200 hours of operation.
N
Unscrew oil filler cap (1)
N
Place a suitable container (1 liter)
under the pump
N
Unscrew the oil sight glass (2) and
tilt the machine to drain it
N
Drain oil into container
N
Screw in and tighten the oil sight
glass (2)
N
Add oil (180 ml, SAE 15 W 40)
N
Check the oil level
N
Refit and tighten oil filler cap
N
Refit the shroud
RB 402 PLUS
1
3
First oil change after 50 hours of
operation, then every six months or
every 500 hours of operation.
N
Unscrew oil filler cap (1)
N
Place a suitable container (1 liter)
under the pump
N
Unscrew the oil drain plug (3)
N
Drain oil into container
N
Refit and tighten oil drain plug
N
Add oil (560 ml, SAE 15 W 40)
N
Check the oil level
N
Refit and tighten oil filler cap
N
Refit the shroud
Engine
The engine oil must be changed as
described in the engine instruction
manual supplied.
English
15