Télécharger Imprimer la page

GreenWorks Tools 2200907 Manuel D'utilisation Et De Sécurité page 2

Publicité

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
Your hedge trimmer has been engineered
and manufactured to Greenworks' high
standard
for
dependability,
operation, and operator safety. When
properly cared for, it will give you years of
rugged, trouble-free performance.
INTENDED USE
This hedge trimmer is intended for cutting
and trimming hedges and bushes in
domestic use. It is not intended to be used
for cutting above shoulder level.
GENERAL SAFETY WARNINGS
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
„ Save all warnings and instructions
for future reference. The term "power
tool" in the warnings refers to your
mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
„ Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
„ Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
„ Keep
children
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
„ Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
„ Avoid body contact with earthed or
English (Original instructions)
ease
and
bystanders
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
of
There is an increased risk of electric
shock if your body is earthed or
grounded.
„ Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
„ Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
„ When
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk
of electric shock.
„ If operating a power tool in a damp
location
residual
protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
„ Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result
in serious personal injury.
„ Use personal protective equipment.
Always
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
„ Prevent
Ensure the switch is in the off-
position before connecting to power
source and/or battery pack, picking
up or carrying the tool. Carrying power
tools with your finger on the switch or
energising power tools that have the
switch on invites accidents.
„ Remove any adjusting key or wrench
1
operating
a
is
unavoidable,
current
device
wear
eye
unintentional
power
tool
use
a
(RCD)
protection.
starting.

Publicité

loading