RADWAG UYA 4Y.PLUS Ultra-Microbalances Manuel De L'utilisateur page 23

XA 4Y.M Microbalances
XA 4Y.A.PLUS Series Balances
Install:
- draft shield (1),
- weighing pan (2).
A – balance with d = 0.01 mg
B – balance with d = 0.1 mg
Remove the transport lock (9) - press the
transport lock down gently, turn it in direction
pointed by <OPEN> arrow, remove the
protection. Keep the transport lock to ensure
proper protection of the weighing instrument
during transportation.
Install:
- centring ring {embossing side upwards} (4),
- draft shield (3) or (1),
- weighing pan (2).
5 - diode: ionizer on/off
Balance for pipettes calibration
Replace the draft shield and the weighing pan
with chamber for pipettes calibration, inside
install:
- weighing pan,
- other components (see description below).
- 23 -