Mass Controls - RADWAG UYA 4Y.PLUS Ultra-Microbalances Manuel De L'utilisateur

Example no. 2, XA 220.4Y balance:
No. Tare value
1 220.0000 g
Example no. 3, XA 220.4Y balance:
No. Tare value
1 0.0000 g
You can preview the entered data, but you are not allowed to edit it.
30.15.

Mass Controls

Each report on completed product control is sent to a printer and saved to the <Mass controls>
database. Each control saved to the database features specific number assigned at the moment of
control completion.
Mass control number format:
y y / M M / d d / H H / m m, where:
yy - year of control end,
MM - month of control end,
dd - day of control end,
HH - hour of control end,
mm - minute of control end,
You can preview data on each control.
Procedure:
1. Enter < Databases> submenu, follow procedure described in section 30 of this user manual.
2. Enter < Mass controls> database and press respective record.
List of parameters defined for control
The reports contain the following information:
Batch number
Start date
End date
Operator
Product
Minimum sample Overview
weight
0.5000 g Minimum sample weight refers to all net weight values
when weighing is carried out using a tare container of
mass value comprised within the whole weighing range
(<TARE> button used), and to all net weights that are
weighed without a packaging (the <TARE> button not
used).
Minimum sample Overview
weight
0.2500 g Minimum sample weight refers to all net weight values
when weighing is carried out without use of a tare
container (<TARE> button NOT used).
In case of such settings, the minimum sample weight is
valid only when you weigh samples without use of tare
containers. If taring function is used then pictogram
informing on use of minimum sample weight goes blank
and the software carries out weighing with tare (no
determined minimum sample weight).
Number of controlled batch
Control process start date
Control process end date
Operator carrying out control process
Controlled product
(function disabled for standard balance models)
- 152 -