Mode Related Settings; Formulations - RADWAG UYA 4Y.PLUS Ultra-Microbalances Manuel De L'utilisateur

•
Automatic operation
Parameter determining whether the measurement is to be carried out manually (on pressing a
key), or automatically. The measurement starts automatically if indication on balance's display
exceeds the value of a set threshold. Measurement of the next object begins after removing
one object from the weighing pan (the indication is below threshold value) and loading the
pan with the next object at the moment when the indication exceeds the set threshold value.
•
Threshold
Value expressed in mass units. In order to trigger the measurement, the indicated value has
to be greater than the threshold value.
3. Set parameters and return to weighing.
4. Load the weighing pan with an object to be weighed, press <
5. "Freezed" measurement result is displayed.
6. In order to proceed to the next measurement press <
•
in case of manual operation mode, press <
•
in case of automatic operation mode, unload the weighing pan and load it with the new object
to be weighed.

21.2. Mode Related Settings

To find out more about the remaining functions refer to section 15.7 of this user manual, Additional
Parameters for a Weighing Process.
22.

FORMULATIONS

< Formulations> is a working mode allowing you to prepare multi-ingredient mixture. The whole
process is carried out automatically.
While making mixtures you can:
•
use formulations database which stores formulations; the program helps you dispense
particular amount of formulation ingredients, this is done by means of respective on-screen
messages.
•
make mixture on your own, without using formulations database, with this option you control
dispensed ingredients, their sequence and quantity by yourself.
If you want to use formulations database, first you have to create recipe (make formulation), next
apply it. In order to create recipe you have to enter <Formulations> database. For detailed procedure
informing you how to create series, read later sections of this user manual.
Formulations mode screen
> button.
> button:
> button.
1. Setup – press to access balance menu.
2. Print header.
3. Print footer.
4. Formulation – press to select formulation
from the database.
5. Formulation multiplier (formulation activated
when <NO> value is set for <Multiplier's
editing> parameter).
6. Target mass
7. Formulation
ingredients
- 90 -
using out of database