RADWAG UYA 4Y.PLUS Ultra-Microbalances Manuel De L'utilisateur page 24

XA 4Y Balances
XA 4Y.A Balances
A – balance with d = 0.01 mg
B – balance with d = 0.1 mg
Remove the transport lock (9): press the
transport lock down gently, turn it in direction
pointed by <OPEN>
protection. Keep the transport lock to ensure
proper protection of the weighing instrument
during transportation.
Install:
- bottom weighing chamber shield (5),
- centring ring {embossing side upwards} (4),
- weighing pan (2),
- draft shield (3) or (1).
Balance for pipettes calibration
Replace the draft shield and the weighing pan
with chamber for pipettes calibration, inside
install:
- weighing pan,
- other components (see description below).
A – balance with d = 0.01 mg
B – balance with d = 0.1 mg
Remove the transport lock - gently press down
the transport lock and turn it in accordance with
<OPEN> arrow, then remove the protecting
element. Keep the transport lock to ensure
proper protection of the weighing instrument
during transportation.
Install the components, follow the diagram.
Install:
- centring ring {embossing side upwards} (4),
- weighing pan (2),
- draft shield (3) or (1).
5 - diode: ionizer on/off
Balance for pipettes calibration
Replace the draft shield and the weighing pan
with
chamber for pipettes calibration, inside install:
- weighing pan,
- and other components (see description below).
- 24 -
arrow, remove the