RADWAG UYA 4Y.PLUS Ultra-Microbalances Manuel De L'utilisateur page 196

3 – reliable
Caution:
The numbering is assigned to a particular value release option and it is identical for all balance types.
If for a particular balance type, value release settings are assigned to a working mode, the command
changes the current mode's settings.
Example:
Command: ARS_2<CR><LF>
Response: ARS_OK<CR><LF>
Give Set Value Release
Command overview:
Information on currently set value release option.
Format: ARG <CR><LF>
Response options:
ARG_x_OK<CR><LF>
ARG_I <CR><LF>
x - parameter, decimal value determining value release options
Example:
Command: ARG<CR><LF>
Response: ARG_2_OK<CR><LF>
Set Last Digit
Format: LDS_n <CR><LF>
Response options:
LDS_OK <CR><LF>
LDS_E <CR><LF>
LDS_I <CR><LF>
n - parameter, decimal value determining last digit settings.
n → 1 – always
2 – never
3 – when stable
Caution:
The numbering is assigned to a particular last digit option and it is identical for all balance types.
If for a particular balance type, value release settings are assigned to a working mode, the command
changes the current mode's settings.
Example:
Command: LDS_1<CR><LF>
Response: LDS_OK<CR><LF>
User Logging
Format: LOGIN_Name, Password CR LF
where: _ - space (enter name and password in a form provided by the balance – lower-case letters
and upper-case letters).
Response options:
LOGIN OK CR LF
LOGIN ERROR CR LF
ES CR LF
- set value release parameter to fast+reliable option
- fast+reliable option set
- command carried out, set value release option is sent
- command understood but not accessible at this moment
- send currently set value release option
- currently set value release option: fast+reliable
- command carried out
- error in-course of command execution, no parameter or incorrect format
- command understood but not accessible at this moment
- set last digit option to value <Always>
- <Always> value set
- command understood, new operator logged in
- command understood, an error in name or password occurred, log in
failed
- command not recognized (format error)
- 196 -