Technical Specifications - ResMed AutoSet CS 2 Manuel Utilisateur

eng.book Page 43 Friday, November 3, 2006 2:43 PM
T S
ECHNICAL
D (H
IMENSIONS
142 x 248 x 293mm (5.6" x 9.8" x 11.5")
W
EIGHT
Flow generator with cover: 3.7kg
Flow generator with H
E
NVIRONMENTAL CONDITIONS
Operating temperature: +5
Storage and transport temperature: -20
Humidity —— operating, storage and transportation: 10%––95% non-condensing
H
OUSING CONSTRUCTION
Injection moulded plastic
A
IR TUBING
1 x 2m
A
IR FILTER
Synthetic fibre
P
ATIENT CONNECTION PORT
22mm taper, compatible with EN 1281-1:1997 Anaesthetic & Respiratory Equipment
- Conical Connectors
P
OWER SUPPLY
AC Input range: 110––120 V and 220––240 V; 50––60 Hz; 60 VA
DC: 30V (via ResMed DC/DC converter)
P
ERFORMANCE
Operating pressure range: 4––20 cmH
S
OUND PRESSURE LEVEL
<30 dB (tested in accordance with the requirements of ISO 17510-1)
B
ATTERY TYPE
Lithium
A
LARM SPECIFICATIONS
All alarms comply with EN 475 for Medium priority alarms: 3 beeps (935 Hz) repeated
at intervals of 25 seconds; yellow LED flashes.
H
•
IGH MAXIMUM MASK PRESSURE ALARM
Stops air delivery at 25 cmH
H
•
IGH MEAN MASK PRESSURE ALARM
Stops air delivery when mean mask pressure exceeds 15 cmH
approx 1 minute).
L
• OW MASK PRESSURE ALARM
Mask pressure is less than 3 cmH
using the A
UTO
PECIFICATIONS
W D)
X X
2
(empty): 4.2kg
UMIDAIRE I
o o
C to +40 C
o
C to +60
O
2
O >700 msec.
2
O for longer than 5 seconds while the patient is
2
S CS2.
ET
o
C
O (averaged over
2
T S
ECHNICAL PECIFICATIONS
43