Technical Specifications - ResMed RCM1 Mode D'emploi

If the problem cannot be solved, contact your care provider or ResMed representative.

Technical specifications

Dimensions (H x W x L)
Weight
Power supply unit (PSU)
Housing construction
Environmental conditions
Operating temperature:
Operating humidity:
Operating altitude:
Storage and transport temperature:
Storage and transport humidity:
Electromagnetic compatibility
IEC 60601-1 classification
Compatible software versions
Wireless module
FCC ID: 2ACHL-RCM3G
IC ID: 9103A-RCM3G
Declaration of Conformity to
1999/5/EC (DoC to the R&TTE
Directive)
Separation
Design life
Note: The manufacturer reserves the right to change these specifications without notice.
RCM only: 5.28" x 1.73" x 5.91" (134 mm x 44 mm x 150 mm)
The stand will add 0.12" (3 mm) to the height and 0.24" (6 mm) to the width.
RCM only: 0.62 lb (280 g)
The stand will add 0.07 lb (30 g) and the wall mount will add 0.02 lb (10 g).
AC 100–240 V, 0.35–0.70 A, 50–60 Hz
DC 24 V, 1.25 A
Cable length 5'10" (1.8 m)
Class II, suitable for continuous operation
Typical power consumption; <3W
Maximum power consumption: <5W
Flame retardant engineering thermoplastic and silicon
+32 o F to +104 o F (+0 o C to +40
10%–95% non-condensing
Sea level to 9842.5 ft (3000 m)
-13 o F to 158 o F (-25 o C to +70
10%–95% non-condensing
Product complies with all applicable electromagnetic compatibility
requirements (EMC) according to IEC60601-1-2, for residential, commercial and
light industry environments. It is recommended that mobile communication
devices are kept at least 3'3" (1 m) away from the device.
Non-transit operable, portable equipment
AirView: 4.1 or higher
Astral: SX544-0401 or higher
Stellar: SX483-0250 or higher
Technology used: 3G/2G
The RCM device complies with FCC Rules.
Additional information regarding the FCC Rules for this device can be found on
www.resmed.com/downloads/devices.
The RCM device complies with Industry Canada Rules.
Additional information regarding the Industry Canada Rules for this device can
be found on www.resmed.com/downloads/devices.
ResMed declares that the RCM device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. A copy of
the declaration of conformity (DoC) can be found on
www.resmed.com/downloads/devices.
The RCM device should be used at a minimum distance of 0.8" (2 cm) from the
body and ideally 12" (30 cm) from the ventilation device during operation.
5 years
The RCM and PSU do not contain any serviceable parts.
o C)
o C)
English 5