Publicité
Les langues disponibles
Les langues disponibles
For that purpose, use the mixing tank (included in the
supply) or have the "mixture" mixed at a petrol station.
Safety instructions for inspections and servicing
Only a regularly serviced and treated appliance may be a
satisfactory aid. Inadequate servicing and maintenance
may lead to unforeseen accidents and injuries.
Never use aggressive cleaning agents for
cleaning. That could lead to appliance damage or
destruction.
Failures - causes - remedy
Failure
Cause
1.
2.
3.
Engine not starting
4.
5.
6.
Engine running idle too
1.
fast
1.
2.
3.
4.
Engine not running at
maximum speed
5.
6.
7.
8.
1.
Engine cannot be
stopped
2.
Tank is empty
"Thirsty" engine
Spark plug is dirty (carbon remains on
electrodes). Too big distance between
electrodes.
Dirty carburettor, carburettor jets
Defective spark plug connection, defective
ignition cable
No ignition spark
Cold engine
Spark plug is dirty (carbon remains on
electrodes). Too big distance between
electrodes.
Dirty carburettor, carburettor jets
Air filter is dirty
Exhaust, cylinder-head port
Crankcase oil seal ring is untight
Cylinders, piston rings are worn out
Improper fuel mixture (too much oil)
Wrong ignition
Light gray spark plug with heating signs
(melt pearls)
Carbon remains in the combustion space
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Optional supply
Spare spool of string - 2-piece kit
Art. No. 94053
Remedy
1.
Fill up full tank
2.
Close the throttle, repeat starting several
times, remove the spark plug if necessary,
clean it and dry it
3.
Clean the spark plug, check the thermal
value of the plug or replace the spark plug
Adjust 0.6-0.7 mm
4.
Clean, blow the carburettor
5.
Replace
6.
Check or replace the short-circuit plug,
cable, ignition module, adjust the joint
dimension (0.3-0.4 mm).
1. Warm up slowly or close slightly the choke.
1.
Clean the spark plug, check the thermal
value of the plug or replace the spark plug
Adjust 0.6-0.7 mm
2.
Clean, blow the carburettor
3.
Clean
4.
Disassemble and clean the exhaust,
remove any carbon remains.
5.
Replace
6.
Replace cylinders, pistons or piston rings;
grind the cylinders to bigger dimensions
and fir bigger pistons.
7.
Refuel as specified in the manual
8.
Adjust the ignition module joint dimension
(0.3-0.4 mm)
1.
Fit a spark plug with a higher temperature
value.
2.
Clean the cylinder head, piston tops and
cylinder-head ports.
16
Publicité
