General Information - Agilent Technologies SpecialTurbo-V 1K-G Mode D'emploi

General Information

This equipment is destined for use by professionals. The user should
read this instruction manual and any other additional information
supplied by Agilent before operating the equipment. Agilent will not
be held responsible for any events occurring due to non-compliance,
even partial, with these instructions, improper use by untrained
persons, non-authorized interference with the equipment or any
action contrary to that provided for by specific national standards.
The Special Turbo-V 1K-G is turbo-molecular pump for high and
ultra-high vacuum applications. It can pump any type of gas or gas
compound. It is not suitable for pumping liquids or solid particles.
The pumping action is obtained through a high speed turbine (max.
45000 rpm) driven by a high-performance 3-phase electric motor. The
Special Turbo-V 1K-G is free of contaminating agents and, therefore,
is suitable for applications requiring a "clean" vacuum.
When used with Navigator controller, the pump is equipped with
auxiliary connectors to supply an additional fan, to control the vent
valve, to be controlled from a remote site by means of an host
computer connected through a serial line (RS232 or RS485).
The following paragraphs contain all the information necessary to
guarantee the safety of the operator when using the equipment.
Detailed information is supplied in the appendix "Technical
Information".
Special Turbo-V 1K-G User Manual / 87-901-006-01 (B)
Instructions for Use

General Information

229/294
16