Special Turbo-V 1K-G Switching Off; Emergency Stop - Agilent Technologies SpecialTurbo-V 1K-G Mode D'emploi

Special Turbo-V 1K-G Switching off

To switch off the Special Turbo-V 1K-G it is necessary to remove the
mains. The controller immediately stops the pump.
WARNING! The Turbo-V controller must be powered with 3-wire power cord (see
orderable parts table) and plug (internationally approved) for user's safety.
Use this power cord and plug in conjunction with a properly grounded
power socket to avoid electrical shock and to satisfy CE requirements. High
voltage developed in the controller can cause severe injury or death. Before
servicing the unit, disconnect the input power cable.

Emergency Stop

To immediately stop the Special Turbo-V 1K-G in an emergency
condition it is necessary to remove the supply cable from the mains
plug.
Special Turbo-V 1K-G User Manual / 87-901-006-01 (B)
Instructions for Use
Use
237/294
16